is supported by readers and may earn an affiliate commission.

How to Cut Down a Tree without a Chainsaw

Master the Art of Tree Cutting: A Guide to Doing it Without a Chainsaw

Cutting down a tree without a chainsaw can be a challenging task, but it is possible with the right techniques and tools. Here are the steps to follow:

1. Choose the right tree: Before you start cutting down a tree, make sure you have chosen the right tree. Look for a tree that is dead, diseased, or damaged. It should also be away from buildings, power lines, and other structures.

2. Plan your escape route: Once you have selected the tree, plan your escape route. This is the path you will take when the tree falls. Make sure it is clear of any obstacles and is a safe distance away from the tree.

3. Make a notch: The first cut you make should be a notch on the side of the tree that you want it to fall. This should be a V-shaped cut that is about one-fourth of the tree's diameter. The notch should be made at a height that is comfortable for you to work.

4. Make a horizontal cut: After making the notch, make a horizontal cut on the opposite side of the tree. This cut should be slightly higher than the bottom of the notch. This cut should be made until it meets the notch.

5. Make the felling cut: The felling cut should be made on the side of the tree that you want it to fall. This cut should be slightly above the horizontal cut and should be made until the tree starts to fall.

6. Move away: Once the tree starts to fall, move away quickly along your planned escape route.

7. Cut the branches: After the tree has fallen, cut off the branches using a handsaw.

8. Cut the trunk: Finally, cut the trunk into smaller pieces using a handsaw or axe.

Remember, cutting down a tree can be dangerous, so it's important to take all necessary safety precautions, wear protective gear, and seek professional help if you are unsure about the process.